ZLaseR-Oil-Air-4
The world’s first oil-air minimum lubrication system with real-time measurement of the lubricant flow rate. Thanks to a patented detection technology that continuously monitors the minimum lubricant flow rate in real time to any interruption or deviation from the set flow rate.
It’s now possible to measure the instantaneous micro flow rate of the lubricant from as little as 100 mm³/h.
IFX-F Mist Sensor
The IFX-F mist sensor allows the immediate detection of mist flow rate. The sensor is capable of measuring the flow rate of the mist passing through the tube. Configurable control range with min and max value thresholds. For monitoring lubrication lines, in MQL Systems for tools lubrication, or detecting the supply of atomized fluids.
New Micro flow sensor IFL-A
The world’s first microflow sensor that can measure a flow rate of just 100 mm3 per hour
With the MWM-monitored oil+air lubrication system, the Faurndau dynamometer has reached the milestone of 30,000 rpm!
This high speed dynamometer, thanks in part to its oil-lubricated bearings with MWM Oil+Air triple-monitored system, which ensure stability and safety even at 30,000 rpm
Human friendly technologies in the 4.0 era for the manufacturing industry
The economy is at the threshold of the fourth industrial revolution. The technical foundation for these endeavours are intelligent and digital networked systems. With their help a highly self-managed production should become possible: men, machines, plants, logistics and products communicate with each other and directly cooperate in the Industry 4.0. MWM acquired in this field […]
Optical streak sensor IFX
Application of optical streak sensors in air+oil lubrication systems Sensors can be mounted in retrofit procedures in order to verify the working of the air+oil mixers that have been previously installed. In this case they are mounted directly at mixer outlet.Please consider that in this case the sensor controls a flow that is never steady […]
MWM Oil+Air Compact Unit ZX 12
Lubrication of 12 points for 6 GMN spindles. Equipped with 6 oil+air mixers MVF-A and back-up mixer, with internal optical oil streak sensors (European Patent Certif. N°2427301).With programmable electronic control unit. The lubrication units type ZX are complete systems which produce the oil+air mixture, by cyclically dosing small and precise amounts of oil in a continuous air […]
Oil+air system for spindle test benches
MWM oil+air lubrication system for spindle test benches. With manual selection of 1 up to 9 lubrication points. Equipped with oil+air mixer MVF-A, with internal optical oil streak sensor (European Patent Certif. N°2427301).With programmable electronic control unit. The ZT-Pro lubrication unit is a complete system which produces the oil+air mixture, to feed different type of spindles […]
Redundant monitoring with 2 IFX oil streak detection sensors
A monitoring system with dual oil streak detection sensors (optical sensor IFX) is considered as redundant. Redundancy is the duplication of components able to perform the same function, with the intention of increasing the system’s reliability. In this way a faulty element does not cause the system’s failure because the particular function can be performed […]
Rotary unions-leakage monitoring of water with IFX-C Sensor
Monitoring of leakage outlet from spindle rotary union.With IFX optical sensor, with programmable sensitivity, you can easily check the amount of fluid flowing in the drain connection of rotary union leakage. A minimum flow is not detected, a copious flow is detected as a seal failure. You can easily see that the sensor alternates between red, green. […]
MWM Oil-Air Unit – Precision Lubrication Systems
Air+oil minimal lubrication offers the most appropriate solution for the lubrication of high speed bearings without overheating due to an excess of lubricant. MWM designs and produces Air+Oil lubrication systems with optical sensor. Air+Oil lubrication units, preassembled MQL units ready for use. For high-speed bearings used in spindles, high speed gears, recirculation ball screws, linear […]
MWM Air+Oil lubrication unit for use in ATEX zone 2-22 hazardous areas
The new MWM system for air+oil lubrication, setting new standards for minimal lubrication of bearings for high speed, for use with the specific ATEX zones 2-22. The integration of patented products like air+oil mixers with integrated optical sensors, digital pressure sensors, and advanced digital PLC controlled, allow 100% control of all important parameters. Visual feedback and electronic reporting error available for the NC machine, to ensure minimal lubrication with reliable 100% security in the start-up and operational.